Filter
Top Products
28
06 Playing discs
Chapter 6
Playing discs
Throughout this manual, the term “DVD” means
DVD-Video and DVD-R/RW. If a function is
specific to a particular kind of DVD disc, it is
specified.
1 If the player isn’t already on, press
STANDBY/ON to switch it on.
If you’re playing a DVD or Video CD, also
turn on your TV and make sure that it is set
to the correct video input.
2 Press / (stop, open/close) to open the
disc tray.
3 Load a disc.
• Load a disc with the label side facing up,
using the disc tray guide to align the disc.
• Never load more than one disc at a time.
4 Press PLAY/PAUSE to start playback.
If you’re playing a DVD or Video CD, a menu
may appear. See DVD-Video disc menus on
page 29 and Video CD PBC menus on page
29 for more on how to navigate these.
STANDBY/ON
TOP MENU
STEP
POWER PLAY
DISPLAY
PROGRAM DISC IN KEY LOCK
PROGRESSIVE
PLAY/PAUSE
MENU
HOME
MENU
RETURN
ENTER
STANDBY/ON
STEP
PLAY/PAUSE
Disc tray
Basic playback controls
The table below shows the basic controls on the
remote for playing discs. The following chapter
covers more playback features in more detail.
Button What it does
Starts playback.
Pauses a disc that’s playing, or
restarts a paused disc.
/ Stops playback.
Open/close the disc tray.
Press and hold for fast reverse
scanning; press for previous
track/chapter skip.
Press and hold for fast forward
scanning; press for next
track/chapter skip.
Numbers Use to enter a title/track number.
(remote Press ENTER to select (or wait a
buttons) few seconds).
• If the disc is stopped, playback
starts from the selected title (for
DVD) or track number (for CD/
Video CD ).
• If the disc is playing, playback
jumps to the start of the selected
chapter or track.