Filter
Top Products
43
09Advanced Setup Menu
If “TOP MENU” is selected in step 4
Press ENTER again to set the Power On Start
mode. This option displays the top menu when
the power is turned ON.
• If the loaded disc does not have a top menu,
the player enters the Stop mode.
• If the (cursor left) button is pressed
before ENTER is pressed, the selection is
canceled.
• When RETURN is pressed, the option is not
set and the POWER ON START screen
returns to the ADV. SETUP menu.
If “TITLE” is selected in step 4
When “TITLE” flashes, use the / (cursor up/
down) buttons or number buttons to input the
desired title number.
When either ENTER or (cursor right) button is
pressed, the “CHAPTER” flashes. Use the /
(cursor up/down) buttons or number buttons to
input the chapter number.
Press ENTER again to confirm playback of a title
or chapter when power is turned on.
• If the (cursor left) button is pressed
before ENTER is pressed, the menu returns
to the TITLE option screen.
• When RETURN is pressed, the option is not
set and the POWER ON START screen
returns to the ADV. SETUP menu.
If “BARCODE/COMMAND STACK” is
selected in step 4
When “GROUP” flashes, use the / (cursor
up/down) buttons or number buttons to input the
group number.
Press ENTER to perform the series of commands
in the barcode when the power is turned on.
• If the (cursor left) button is pressed
before ENTER is pressd, the menu returns
to the BARCODE/COMMAND setting
screen.
• When RETURN is pressed, the option is not
set and the POWER ON START screen
returns to the ADV. SETUP menu.
The selected group is automatically set
“Stack Repeat” function.
Setting to turn on player power only
When selecting a title, enter a title which is not
on the disc.
Example: Enter title 99.