Pioneer DVR-440H-S DVD Recorder User Manual


 
Using the GUIDE Plus+® electronic program guide
05
48
En
2 Highlight the right channel tile of the
channel you want to make a change to.
3 Press the RED Action button to
change the channel source, or the GREEN
Action button to enter a program
number.
Each press of the RED Action button
changes the channel source (Tuner, Ext.
Rec. 1, etc.). To set a program number, use
the number buttons to enter a program
number then press
ENTER. (When set to
Tuner, make sure that the program number
matches the preset number of this recorder
for what you want to record).
The Setup Area
The Setup Area is where you can set up the
GUIDE Plus+ system for your particular
region, TV reception conditions, and so on.
Making changes to your GUIDE Plus+
setup
1 Select ‘Setup’ from the Menu bar.
2 Highlight the part you want to
change.
You can change the Language, Country,
Postal Code
1
and the External Receiver
settings.
3 Press
ENTER to confirm.
Manual Host Channel setup
The GUIDE Plus+ system will automatically
identify your Host Channel as soon as the
recorder is put into standby for the first time.
See the table on page 34 for a list of all the
European Host Channels.
If you know your Host Channel details
(source and program number) or if the
automatic identification did not provide the
expected result, you can identify your Host
Channel manually. Select Host Channel
Setup in the Setup area and follow the
instructions on the TV. Select the correct
source (e.g., internal tuner or external
receiver) and enter the respective program
number (e.g., if you have to press 9 on the
remote to watch your Host Channel, enter 9
Press ENTER to access the Basic Setup screen.
Basic Setup
Host Channel Setup
GUIDE Plus+ System Information
Note
1 Making changes to the Country or Postal Code settings may require a new download of TV listings information.
This can take up to 24 hours.
05 GuidePlus+ EPG_EU.fm 48 ページ 2006年2月16日 木曜日 午後7時0分