Filter
Top Products
Recording
06
58
En
6 Press to stop recording.
• If you set the recording time in the
previous step, you can still stop the
recording anytime by pressing
STOP
REC
.
• Recording will stop automatically when
there is no more space on the HDD/
DVD, or after 12 hours of HDD recording
(whichever is sooner).
If VPS/PDC is active for two timer
programs that are programmed to start
at the same time, then the program that
actually starts first takes priority.
Tip
• During recording you can turn on/off the
SCART loop through function. During
recording, press the front panel
CH
+
button to switch to
SCART THRU
(loop
through on), or
CH –
to switch to
SCART
NORM
(loop though off). Loop through is
automatically reset to off after recording
has finished. Note that you can’t switch
loop through on if recording from the
AV2/(INPUT 1/DECODER)
or
AV1(RGB)-TV
connectors.
Pause Live TV
The Pause Live TV feature lets you effectively
pause a TV program you’re watching. When
you’re ready to resume watching, just press
the Play button.
To use this feature the recorder must be
connected to your TV using a SCART cable,
and the
AV Link
setting
(page 126) should be
set to
This Recorder Only
.
Not all TVs support this feature. Check the
instructions that came with your TV if you’re
not sure.
Important
• Pause Live TV will not work as expected
when watching TV via an external
component such as a VCR or digital
tuner. It only works with the channel
selected on the TV.
1 Start recording the current TV
channel.
Recording continues with playback paused.
• Note that it may take up to 10 seconds
for recording to start.
2 Press to start playback.
You can also use the scan buttons (
/
), pause (
PAUSE
) and stop (
STOP
)—all without affecting the recording.
3 Press to stop the recording.
Tip
• You can press
PAUSE LIVE TV
while the
recorder is in standby to switch on and
immediately start recording. After
pressing
PAUSE LIVE TV
, it will take at
least 10 seconds for the picture to
change (during this time, all controls
except the power button are inoperative).
• Please note that you can’t record from
another component (VCR, etc.) that is
connected by a SCART cable to the
AV2/
(INPUT 1/DECODER)
connector using
the Pause Live TV feature.
STOP REC
HDD
PAUSE LIVE T
V
PLAY
STOP REC
DVR540H_WV_EN.book 58 ページ ２００６年２月１６日 木曜日 午後４時３４分