Filter
Top Products
07Preparation
English
25
En
U/V mixer
• Be sure to connect the antenna or the Cable
Converter as shown above. Signal reception may
fail if not properly connected.
• Be sure that the Cable Converter output signal is
assigned to the ANTENNA/CABLE B input on the
Media Receiver.
• How to change channels when the Cable Converter
output signal is connected to the ANTENNA/CABLE
B input on the Media Receiver.
• Press ANT on the remote control unit to switch to
ANTENNA/CABLE B.
• You can view an image right after selecting the
output channel on the Cable Converter.
Switching between tuner A and B
To watch broadcasts via the two tuners, you can select
it by pressing ANT on the remote control unit.
• While watching a broadcast, press ANT to view the
image received from the other tuner.
•Pressing ANT while viewing in Dual Screen mode
(TV image and video image) with TV selected will
display the TV image of the other tuner.
•Pressing ANT while viewing Dual Screen with two TV
images displayed will not have any effect.
•Pressing ANT while viewing Dual Screen with two
video images displayed will switch the selected
screen to a TV image.
Media Receiver (rear)
VHF antenna UHF antenna
Cable TV
IN
A ANTENNA/CABLE B
OUT
IN
OUT
Cable Converter
When making the above connections, first
remove the coaxial cable attached before
shipment.
Connecting a VHF/UHF antenna and Cable Converter
PDP5040HD-Eng (17-27) 7/24/03, 1:58 PM25