Pioneer PDP 4340HD Flat Panel Television User Manual


 
01Important User Guidance Information
English
7
En
Panel sticking and after-image lag
•Displaying the same images such as still images for a
long time may cause after-image lagging. This may
occur in the following two cases.
1. After-image lagging due to remaining electric load
When image patterns with very high peak luminance are
displayed more than 1 minute, after-image lagging may
occur due to the remaining electric load. The after-images
remaining on the screen will disappear when moving
images are displayed. The time for the after-images to
disappear depends on the luminance of the still images
and the time they had been displayed.
2. After-image (lag image) due to burning
Avoid displaying the same image on the Plasma Display
continuously over a long period of time. If the same image
is displayed continuously for several hours, or for shorter
periods of time over several days, a permanent after-image
may remain on the screen due to burning of the fluores-
cent materials. Such images may become less noticeable
if moving images are later displayed, but they will not
disappear completely.
The Energy save function can be set to help prevent
damage from screen burning (see page 54).
About operations through i.LINK
PIONEER shall not always assure normal video/audio
recording or playback when a D-VHS is operated through
i.LINK.
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE
CART, STAND, TRIPOD, BRACKET, OR TABLE. THE
PRODUCT MAY FALL, CAUSING SERIOUS PERSONAL
INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE
ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR
TABLE RECOMMENDED BY THE MANUFACTURER, OR
SOLD WITH THE PRODUCT. FOLLOW THE
MANUFACTURE’S INSTRUCTIONS WHEN INSTALLING
THE PRODUCT AND USE MOUNTING ACCESSORIES
RECOMMENDED BY THE MANUFACTURER.
A PRODUCT AND CART COMBINATION SHOULD BE
MOVED WITH THE CARE. QUICK STOPS, EXCESSIVE
FORCE, AND UNEVEN SURFACES MAY CAUSE THE
PRODUCT AND CART COMBINATION TO OVERTURN.
PDP5040HD-Eng (06-12) 7/24/03, 1:57 PM7