Filter
Top Products
10Electronic Program Guide (EPG) (for DTV Only)
English
59
En
Presetting TV programs using the EPG
Using the EPG, you can easily preset digital TV pro-
grams for watching later (auto channel select), record-
ing with a D-VHS recorder, or recording via a VCR
controller.
Using auto channel select
With the power to the system left on, this function
automatically selects the preset TV program when its
on-air time comes. Then you will not miss watching an
important TV program when you are enjoying another
TV program.
1
Press DTV GUIDE.
• The EPG screen appears.
2
Press / and / to select a program to be
preset, and then press ENTER.
• Select a program not yet started.
•A setup menu appears.
3
Press / to select “Program View”, and then
press ENTER.
•A dialog box for confirmation appears.
4
Press / to select “OK”, and then press ENTER.
• The program is preset and the schedule table is
restored.
•A blue square icon appears for the preset
program.
•A black icon appears for overlapped
presetttings.
5
Press DTV GUIDE to exit the Program Guide.
With the system switched on, a channel switch
alarm message approximately 30 seconds before
execution and the channel is switched a short
time before the start of the program.
• Auto channel select is not executed when the system
is in the standby mode.
•Finish presetting operations one minute before the
start of the program; otherwise presettings may fail.
•For priorities about overlapped presettings, see
“Priority rules for overlapped presettings” on page 63.
PDP5040HD-Eng (56-64) 7/24/03, 2:00 PM59