Filter
Top Products
11Enjoying through External Equipment
English
73
En
Setting up for controlling a D-VHS recorder
You can operate the connected D-VHS recorder from
the Plasma Display that shows the control panel
screen. After making the connections, use the menu to
specify the model of the D-VHS recorder to be operated.
You can operate only a single D-VHS recorder from the
Plasma Display.
1
Press HOME MENU.
2
Press / to select “DTV Setup”, and then press
ENTER.
3
Press / to select “i.LINK Setup”, and then
press ENTER.
4
Press / to select “i.LINK List”, and then press
ENTER.
• The list of the registered D-VHS recorders
(i.LINK list) appears.
5
Press / to select the D-VHS recorder model to
be operated, and then press ENTER.
6
Press / to select “Connect”, and then press
ENTER.
7
Press HOME MENU to exit the menu.
• The following information appears at the right end of
the i.LINK list to indicate the connection status of the
D-VHS recorders:
Control: Data connection with the D-VHS
recorder has been established and the
recorder is ready for control.
Connected: The D-VHS recorder has been physi-
cally connected, and can be controlled
if it is selected for control.
Other: Equipment other than a D-VHS re-
corder has been physically connected
and thus cannot be controlled.
—: Currently not physically connected
PDP5040HD-Eng (65-80) 7/24/03, 2:00 PM73