Filter
Top Products
10 Electronic Program Guide (EPG) (for DTV Only)
62
En
Setting the timer manually
Using the menu, you can also preset digital TV pro-
grams by specifying their scheduled date and time.
1
Press HOME MENU.
2
Press / to select “Rec/View Timer”, and then
press ENTER.
• The schedule table appears.
3
Press / to select a list number, then press .
•You can select any desired list number.
4
Press / to specify a date, and then press .
5
Press / to specify the start hour, and then press
.
6
Press / to specify the start minute, and then
press .
7
Press / to specify the end hour, and then press
.
8
Press / to specify the end minute, and then
press .
9
Press / to specify a channel number, and then
press .
10
Press / to select “VIEW”, “ANALOG” or a D-
VHS recorder, and then press ENTER.
• Select “VIEW” when presetting the program for
auto channel select. Select “ANALOG” when
presetting it for recording via a VCR controller.
Select a D-VHS recorder when presetting it for
recording with a D-VHS recorder.
•In the Info field, “View OK” appears when
presetting for auto channel select is accepted,
and “Rec OK” appears when presetting for
recording is accepted.
11
If presetting another program, press / to select
another list number, and then repeat steps 4 to 6.
•You can preset up to 28 programs.
12
Press HOME MENU to exit the menu.
• If the schedule of the selected program is overlapped
with another presetting, “Overlapped” appears in the
Info field. Presettigs with “Overlapped” may not be
partially or entirely executed.
• When entering into the schedule table, pressing
ENTER causes the cursor to jump to an empty field.
•Presetting becomes ineffective if the start time and
the end time are identical or if presetting operations
are performed within two minutes before the start of
the program.
•Presettings made using the EPG are automatically
shown in the schedule table.
•For presetting made using the EPG, “E” appears
beside the channel number in the schedule table. If
you alter the presetting content, “E” disappears.
•For priorities about overlapped presettings, see
“Priority rules for overlapped presettings” on page 63.
• If you switch off the system using the POWER
button, the program presetting will become
ineffective. Be careful not to switch off the power.
PDP5040HD-Eng (56-64) 7/24/03, 2:00 PM62