Filter
Top Products
11Enjoying through External Equipment
English
77
En
Signal names for 15-pin mini D-sub connecter
15
14
13
12
9
11
10
8
7
6
5
4 3
2
1
(front view)
Pin No. Signal name
1 R
2 G
3 B
4 Not connected
5 Not connected
6 GND (ground)
7 GND (ground)
8 GND (ground)
9 +5V
0 GND (ground)
- Not connected
= SDA
~ HD
! VD
@ SCL
• A Macintosh adaptor may be required for use with
some Macintosh computers.
Watching an image from a personal
computer
Connecting a personal computer
Use the PC terminals to connect a personal computer.
• The PC input terminals are DDC1/2B-compatible.
•Refer to page 107 for a list of personal computer
signals compatible with the Plasma Display System.
Media Receiver (front view)
ø 3.5 mm stereo mini-plug cable
(commercially available)
RGB cable
(commercially available)
Personal computer
Displaying an image from a personal com-
puter
When connecting to a personal computer, the input
signal type is automatically identified. If the personal
computer image does not come in clearly, you may
need to use Auto Setup in the menu. See page 81.
To watch an image coming from the personal com-
puter, press PC on the remote control unit or press
INPUT on the Plasma Display to select “PC”.
• The PC terminals cannot be used for audiovisual
equipment.
PDP5040HD-Eng (65-80) 7/24/03, 2:00 PM77