Filter
Top Products
50
VD
Changing Initial Settings
Setting Remote Control Code Type (REMOTE CODE SELECT)
When using this product with a Pioneer DVD player, set the remote code of the supplied
remote controller to enable operation of this product only. There are two remote codes,
CODE TYPE A and CODE TYPE B. When using this product with an “XDV-P9” Multi-
DVD Player, select CODE TYPE B. When using this product with a DVD navigation unit,
select CODE TYPE A.
Precaution:
• When changing the code type, set the switch on the left side of the remote con-
troller to the same setting. (See page 13.)
Switch to the third SET UP MENU to select
the “REMOTE CODE SELECT” .
“REMOTE CODE SELECT” is indicated in blue.
(For details, see page 37.)
Click the joystick.
Code type selection menu is displayed.
Move the joystick up/down to select the
desired code type.
The currently set code type is indicated the mark
“”. The code type selected with the joystick is indi-
cated in blue.
Click the joystick.
The selected code type is set.
Note:
• Pressing the RETURN button takes you back to the previous display.
4
3
2
1