Filter
Top Products
Condition Memory
This function memorizes audio language, subtitle language, angle number, audio output (L, R)
and aspect ratio made during disc playback for up to 30 discs. Without any special opera-
tions, the final setting details during playback of a disc are memorized. The next time a disc
is played, the previous settings are automatically applied.
Note:
• With some discs, audio language and subtitle language are automatically specified, in which
case condition memory does not function.
• When the number of discs exceeds 30, settings for the latest disc replace those for the least
recent disc.
Resetting the Microprocessor
When the ignition switch is turned OFF, pressing the RESET button lets you reset the micro-
processor to its initial settings without changing SET UP MENU settings, Condition Memory
and other settings.
Press the RESET button in the following cases.
• After changing the setting of the Mode switch on the right side of the unit.
• When this unit fails to operate correctly.
• When strange (incorrect) messages appear on the display.
Resetting
Turn the ignition switch OFF.
Press the RESET button.
Use a pen tip or other pointed instrument.
Note:
• After completing connections or when you want to erase all memorized settings or return the
unit to its initial (factory) settings, switch your engine ON or set the ignition switch to ACC
ON before pressing the RESET button.
2
1
6
Before Using