Filter
Top Products
57
Others
54
7 Common problems (continued)
Symptom Cause Remedy
There’s no picture.
The prohibited mark “” is
displayed, and operation is
not possible.
The picture stops (pauses)
and the unit cannot be
operated.
There’s no sound.
Volume level is low.
There’s audio and video
skipping.
The picture is stretched, the
aspect is incorrect.
Rear display picture
disappears.
When the ignition switch is
turned ON (or turned to
ACC), the motor sounds.
The parking brake cord is not
connected.
The parking brake is not applied.
The operation is prohibited for
the disc.
The operation is not compatible
with the disc’s organization.
Reading of data has become
impossible during playback.
The volume level on the head
unit or connected component is
low.
The attenuator is ON.
This unit is not firmly secured.
The aspect setting is incorrect
for the display.
The source disc being listened to
with the head unit has been
ejected.
This product confirms whether a
disc is loaded or not.
Connect a parking brake cord,
and apply the parking brake.
This operation is not possible.
After pressing the STOP (7) but-
ton once, start playback once
more.
Raise the volume level on the
head unit or connected compo-
nent.
Switch the attenuator on the
head unit OFF.
Secure this unit firmly.
Select the appropriate setting for
your display. (See page 46.)
Before ejecting the disc, switch
the source. This problem may
occur when certain connection
methods are used.
This is a normal operation.