Filter
Top Products
57
Others
If You Forget Your Code Number
Refer to “Changing the Level”, step 3 on page 45, and press the CLEAR button 10 times.
The registered code number is canceled, letting you register a new one.
Error Message
When problems occur with disc playback, an error message appears on the display. Refer to
the table below to identify the problem, then take the suggested corrective action. If the error
persists, contact your dealer or your nearest PIONEER Service Center.
Message (error number) When this message is displayed Remedy
ERROR-02
THERMAL PROTECTION
IN MOTION
DIFFERENT REGION DISC
NON-PLAYABLE DISC
The disc is dirty.
The disc is scratched.
The temperature of this unit is
outside of the normal operating
range.
The disc does not have the same
region number as this unit.
This type of disc (CD-ROM etc.)
cannot be played by this unit.
The disc is loaded upside down.
Wipe the disc clean. (See page
11.)
If the disc is scratched, replace it
with another. (See page 11.)
Wait until the unit’s temperature
returns to within normal operat-
ing limits.
Replace the DVD with one bear-
ing the correct region number.
Replace the disc with one this
unit can play. (See page 7.)
Check that the disc is loaded
correctly.