Filter
Top Products
20
Charging the battery
The battery must be attached to the GPS to be recharged.
1. Attach the battery to the GPS.
2. Plug the supplied AC power adapter or DC power cord into the
GPS’s “DC 12V IN” power jack (on the right side of the GPS).
3. Plug the other end of the power cord into a household outlet (for the
AC power adapter) or a car cigarette lighter (for the DC cord) as
shown below:
Detaching the battery
If the GPS is not going to be used for a long time, the battery should be fully
charged before detaching. (When the GPS is turned off, it’s still using some
power in Standby mode, which eventually drains the battery.)
To detach the battery pack:
1. Make sure the power is turned off and the power is unplugged.
2. Press the battery pack latch toward the front of the GPS, then slide
the battery off the GPS.
3. Store the battery in a safe, cool, and dry place.