Filter
Top Products
21
Installing the system in your car
Use the windshield mount bracket to mount the GPS in your car.
1. Loosen the nuts on the bracket hinges.
2. Slide the mounting cradle onto the bracket’s rotating head until it’s
locked into place.
3. Clean the bracket’s suction cup using the enclosed alcohol prep
pad or a cotton ball moistened with isopropyl (rubbing) alcohol. A
dirty suction cup won’t stick to any surface.
4. To mount the bracket to your windshield or side window, flip the
suction cup lever up, press and hold the suction cup against the
window, then press the suction cup lever all the way down.
5. To mount the bracket on your dashboard, peel the sticker backing
off the dashboard mount disk, then press the disk onto your
dashboard. Flip the bracket’s suction cup lever up, press and hold
the suction cup against the dashboard disc, then press the suction
cup lever all the way down.
6. Remove the battery from the GPS (if attached), then clip the GPS
into the cradle.