Filter
Top Products
Connections & Setup
Jacks on the Back of Your TV
If you al'e cormecting many components, please consult tile man_.tal that came with each
component I_:)rconnection instructions. The picture of your TV's back pLIlle[ describes tile jacks
on the I_ack of your TV and what types of conlponents that you can connect to these jacks.
When connecting, make sure you connect Output jacks to Input iacks. Video to Video, Right
Audio to Right Audio, etc.
Audio and Video Input Jacks:
AUDIO R and L/MONO and VIDEO
Connect any of the following components:
• DVD Player o Satellite Receiver
• Laserdisc Player - VCR
• Internet Access Device
To watch the content from tile component that's
connected to the VIDEO Input Jack, press the
Audio Output Jacks:
R and L OUT
Connect audio cables to
these iacks and to an
TV
(backpanel)
WHO • INPUT button on the remote (the TV switches
to the correct channel).
J
amplifier or audio receiver
for improved sound quality.
/
G-LINK
/
VIDEO R AODID L/MONO /'
/
k
{o el"
/
G-LINK Jack
Connect the end of the
G-LINK cable (provided)
to this jack. The G-LINK
cable enables the TV's
Guide Plus+ system to
interact with the cable box
and/or the VCR. A picture
of the G-LINK cable is on
page 7.
/
S-VIDEO Jack
Connecting an
S-Video cable is
optional S-Video
provides better picture
quality than a regular
video cable.
@
S-VIDED
]
_ CABLE/
ANTENNA
CABLE/ANTENNA Jack
Connect the coaxial callle
from tile VCR's Output jack to
this iack. If you're not
connecting a VCR, connect a
coaxial cable that carries tile
signal flon] the antenna,
cal)le, or cable box to the
CABLE/ANTENNA iack.
12 Chapterl