Filter
Top Products
Using the TV's Features
Grid guide Grid guide
menu action buttons
selection
LaleNight C0nan
Grid Guide Action Buttons
Action buttons will change according to where you are in the GUIDE Plus+
system. Be sure to look at the action bar hefore pressing the
com[ua nO n n nl/_el_s.
When highlighting the program, timefollowing Action buttons appear:
Watch Press 1 on the remote to place a {imm in the Schedule fl)r the TV to
turn on and tune to the program highlighted in the channel listing. When
the TV turns on, the GUIDE Plus+ system will autonmtically appear with the
scheduled pt'ogram highlighted and tuned it1 the video window.
Go To Press 2 on the remote to bring up thc direct dial hox and enter the
n(unher of the channel you want. Press OK to highlight timechannel and
cun-ent program in the channel listing uf timeGrid guide. Press OK again to
tune to timehighlighted channel. If timevideo window is unlocked, it will
automatically tune to the channel.
• Record Press 3 on the remote to place a timer in the Schedule for the VCR
to record the program highlighted in the channel listing.
If you have a cable box, changing channels on the,TV will not cause the
cable box channel to change while recording.
Record will only appear if you have set up the GUIDE Plus+ system and
specified yovtr VCR type.
The program in[brmation window will display a confirmation when you have
successfully scheduled a program to watch or record.
Note: lf you have selected two programs to watch or record which begin
at the same time or overlap, you will receive a timer conflict message.
You must choose between the two programs.
When highlighting the Channel names (the left column on the channel listing),
the following Action buttons appear:
• £ock/Un_ck Press 1 to lock or unlock the video window to either stay at
one channel as you browse the GUIDE Plus+ system (lock) or change as
you browse through different channels (unlock).
To Press 2 on the remote to bring up the direct dial box and enter the
number of the chant_el you want. Press OK to highlight the channel and
current program in the channel listing of the Grid Guide. If the video
window is locked, press OK to tune to the highlighted channel. If the video
window is unlocked_ it will automatically tune to that channel.
30 Chapter 3