RCA 20F524T CRT Television User Manual


  Open as PDF
of 40
 
Get the Picture
TherstpartofconnectingyourTVistogetthepicture,alsoknownasasignal.ThebackpanelofyourTVallows
youtoreceiveanaloganddigitalchannelsbyusingtheANTENNA/CABLEINPUT.
DIG•ANA
GUIDE
+•?
CH LIST
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
ANTENNA
(DIG•ANA)
button
What You Need to Know
• ThistelevisionisequippedwithaQAM(QuadratureAmplitudeModulation)tunerthatenablesreceptionof
unscrambleddigitalcablecontent.Checkwithyourcableproviderforinformationaboutcontentavailabilityin
yourarea.YourTValsoreceivesanalogcableTVchannels.
• TheAuto Channel SearchscreenintheSetupmenusearchesforbothanaloganddigitalchannels.ChooseCable
asyoursourcetype.Tocompleteachannelsearchnow,gotopage11.
• Whenyouarereadytowatchdigitalchannels,makesureyouaretunedtoadigitalchannel.Digitalstations
typicallyhaveadashintheirchannelnumberbecausetheymaycontainsubchannels,forexample,8-3.
Whenyouarereadytowatchananalogchannel,makesureyouaretunedtoananalogchannel.Analogstations
containnomorethanthreedigits.Refertopage13forinformationonanaloganddigitalstations.
Whenusingtheinputdescribedabove,presstheANTENNA
(DIG•ANA)buttonontheremotetotogglebetweenthedigitaland
analogchannels.Refertopage13.
Receiving Cable Channels
Coaxial cable
Continues on next page...
What You Need
•Coaxialcablefromacableoutlet.PlugthecoaxialcableintotheANTENNA/CABLEINPUT
toreceiveyouranaloganddigitalcablechannels.
•WhenyougettotheAuto Channel Search screenintheSetupmenu,chooseCable.
Plug in the TV and Turn It On
Plugtheendofthepowercordintoagroundedwalloutlet.Inserttheplugcompletelyintotheoutlet.PressON•OFF
ontheremote,orpressPOWERontheTV’sfrontpanel.
Put Batteries in the Remote
• Removethebatterycompartmentcoverfromthebackoftheremotebypushingdownandslidingoffthecover.
• Insert2fresh“AA”batteries.Makesurethepolarities(+and-)arealignedcorrectlytothediagraminsidethe
batterycompartment.
• Replacethecover.
Note: If you won’t need to use your remote for a long period of time, remove the batteries to avoid damage due
to possible leakage.
Chapter 1 5
Connections & Setup
 previous next