Filter
Top Products
Connections & Setup
Chapter 1 15
Connecting the Device
This connection allows you to connect a device such as a VCR that has audio/
video inputs and outputs. Connecting to the TV’s output allows you to record
both analog and digital programs (except copy protected or component video
formats).
Using the example of a VCR:
1. Connect your cable and/or off-air antenna as described on page 9.
2. Connect your composite audio/video cables to the TV’s input.
Connect composite audio/video cables to the TV’s INPUT 1 jacks (R and
L-Audio, and Video) and to the VCR’s audio/video outputs.
3. Connect your composite audio/video cables to the TV’s output.
Connect composite audio/video cables to the TV’s AUDIO/VIDEO OUTPUT
jacks (R and L-Audio, and Video) and to the VCR’s audio/video input.
4. Connect the supplied G-LINK cable. If you want to use one-touch VCR
recording and timed recordings, you need to connect the G-LINK cable. Go
to page 19 for more information.
Red
Use one set of composite audio/video
cables to connect to the TV’s input;
another set to connect to the TV’s output.
Composite cables are color coded-
Yellow= video; Red= right audio; white=
left audio
• If you are done connecting
devices to your TV, go to
page 21 to complete the
Assisted Setup.
• To continue connecting
devices, go to the next page.
• If you don’t have the cables
needed for this connection,
go to page 88 for accessory
information.
Yellow
White