Filter
Top Products
Chapter 2 35
Using the Remote Control
MENU Makes Main Menu appear and disappear. In the TV Guide On Screen system, displays
more options for the highlighted item.
MUTE Reduces the TV’s volume to its minimum level. Press again to restore volume. The TV
Audio Output menu must be set to Variable Level, Speakers On to control the TV’s volume.
OK When a menu item is highlighted, press OK to select the item.
ON•OFF Turns the TV on or off. Your HDTV is equipped with a special lamp system. In order
to preserve the life of the lamp, the TV must warm up and cool down properly when you turn
the TV on and off. When you turn the TV off, the screen turns blue and fades to black. While
the screen is blue, you can still turn the TV back on. If the screen is black when you try to turn
it on, the TV’s lamp may be in its cool-down cycle. The TV’s audio comes on, then the picture is
displayed after a few moments.
In other modes (VCR, DVD, SAT/CAB, AUX, AUDIO), and if programmed, turns the device on
and off.
PRESETS Toggles through the Picture Presets for the input currently tuned to. The preset is
only temporarily changed and goes back to the original menu setting when you change channels
or inputs or turn off the TV.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, provides transport
control for some remote-controllable VCRs and CD and DVD players.
SAT/CAB (Satellite/Cable) Places the remote in SAT/CAB mode. If Auto Tuning is enabled,
turns on the TV and tunes it to the correct Video Input Channel.
SKIP Press once before changing channels and the TV returns to the original channel after 30
seconds. Press repeatedly to add more time. Press CLEAR to cancel.
SOUND On digital channels/inputs, toggles the available Audio Modes. For analog channels,
toggles SAP on or off. If you change channels/inputs, the default for Audio Mode or SAP is
restored. Does not affect default menu settings for SAP or Audio Mode.
TV Places the remote in TV mode. Turns on the TV and tunes to the last-viewed TV channel or
input.
VCR Places the remote in VCR mode. If Auto Tuning is enabled, turns on the TV and tunes to
the VCR Video Input Channel.
VOL – or VOL + Decreases or increases the TV’s volume. The TV Audio Output menu must be
set to Variable Level, Speakers On to control the TV’s volume.