Filter
Top Products
Using the TV’s Features
Chapter 3 39
2. Use the channel up and down, INPUT, ANT•CAB, or number buttons, or component buttons
that have been auto tuned, to change the PIP channel.
3. To change the program in the main picture window, press CH CTRL. Then use any of the
above mentioned buttons. To go back and forth between controlling the PIP window and the
main picture, press the CH CTRL button.
The message “PIP Not Viewable” in the channel banner lets you know that PIP is not
available on this channel and you should tune to another channel.
PIP Not Viewable Cable Input
Ch 8-1 WLPJ
Antenna Input
4:3 Normal 480i SDListening to Stereo
MPAA - Not Rated
12:39 PM12:30 AM00:30Program Title/Acquiring Channel
PIP Ch 8 Unrated Cable Input
Ch 8-1 WLPJ
Antenna Input
4:3 Normal 480i SDListening to Stereo
MPAA - Not Rated
12:39 PM12:30 AM00:30Program Title/Acquiring Channel
PIP channel number
Main picture
channel
number
Channel
control
indicator
PIP Problems?
• If you are channel surfing in the main window and PIP disappears, you may have tuned to a
digital channel. To view PIP and the main picture, make sure that both the main and PIP
channels are analog inputs, or signals. Continue changing the channel until you find an analog
(NTSC format) channel. The PIP window will reappear.
• If you press PIP and the PIP window is gray, you may have activated the Parental Control
feature and the program exceeds the rating limits you set. For information on removing limits,
see the section “Parental Controls.”
• Closed captioning is not viewable in the PIP window.
• PIP channel skips all digital (ATSC) TV channels and tunes to analog channels.
• PIP can only be displayed in analog signals from CABLE, ANTENNA, composite, S-VIDEO and
component (Y, Pb, Pr) inputs in 480i format.
Emergency Alert System (EAS)
The EAS works only if you have a digital cable card connected to the CableCARD slot on the back
of the TV. Your cable company informs you of emergency alert information related to your state or
local-level emergencies, such as Flash Flood Warnings, Severe Thunderstorm Warnings, and
Tornado Watches. When your TV receives a state or local-level emergency, a message is displayed
that lasts approximately 2 minutes, but can be repeated if necessary. During this time, you can’t
clear the information being displayed. In the rare event that there is an national-level emergency,
your TV would tune to a channel broadcasting the emergency information.
16339320.03 Features 5/27/04, 4:03 PM39