Filter
Top Products
Connections & Setup
12 Chapter 1
Audio Connections
With the audio versatility of your HDTV, you can choose various connection options depending on the type and quality
of sound that you want. Choose one of the options or refer to the user’s manual of each component that you are
connecting to get the best results.
• Connect audio/video receiver (speakers connected to receiver) using the digital audio output jack to your TV (best sound).
• Connect audio/video receiver (speakers connected to receiver) to your TV (better sound).
• Connect speakers to your TV (good sound).
How to Connect: TV + Receiver with Dolby Digital + Speakers + Use TV as
Center Channel
If you own a receiver with Dolby Digital® or PCM (Pulse-Code Modulation) audio receiver that uses an optical cable-type
input, connect an optical cable for excellent audio quality (shown on opposite page).
1. Connect one end of the optical cable to the DIGITAL AUDIO OUT jack on your TV to the DIGITAL OPTICAL INPUT
Jack on your receiver/amplifier receiver.
• If your receiver can decode Dolby Digital and PCM, go to Audio menu, select Digital Audio Output, and
select AutoSelect (recommended) or PCM option.
• If your receiver can decode only PCM, go to Audio menu, select Digital Audio Output, and select PCM
option.
2. If you want to use your TV as the Center Channel, use speaker wire to connect the audio receiver’s CENTER
SPEAKER OUTPUT to the TV’s CENTER CHANNEL INPUT as shown on the opposite page.
• Switch INTERNAL SPEAKER SOURCE to EXT AMP.
3. Use speaker wire to connect the Audio/Video receiver to external front and rear speakers. Refer to your audio
receiver manual to complete speaker hookup to the receiver.
Caution: DO NOT connect your audio/video receiver’s outputs or center channel output to the red and black
EXTERNAL SPEAKERS OUTPUT on the TV. Damage to the TV may result.
OR
How to Connect: TV + A/V Receiver + Speakers + Use TV as Center Channel
1. Connect the FIXED/VARIABLE AUDIO OUTPUT from the TV to an A/V receiver using audio cables.
2. Be sure to go to the Fixed/Variable Out screen in the Audio menu and select whether you want the FIXED/
VARIABLE AUDIO OUTPUT jacks to send fixed volume audio or variable volume audio.
• Fixed Output provides fixed-level audio output from the TV. This audio output is ideal for connecting to an
A/V receiver that has its own volume control.
• Variable Output provides variable-level audio output. Volume levels are controlled by the volume controls on
the TV and TV remote control.
3. If you want to use your TV as the Center Channel, use speaker wire to connect the audio receiver’s CENTER
SPEAKER OUTPUT to the TV’s CENTER CHANNEL INPUT as shown on the opposite page.
• Switch INTERNAL SPEAKER SOURCE to EXT AMP.
4. Use speaker wire to connect the Audio/Video receiver to external front and rear speakers. Refer to your audio
receiver manual to complete speaker hookup to the receiver.
Caution: DO NOT connect your audio/video receiver’s outputs or center channel output to the red and black
EXTERNAL SPEAKERS OUTPUT on the TV. Damage to the TV may result.
*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
1614682A.03_cx_8.22 9/18/03, 5:27 PM12