RCA HDLP50W151 Flat Panel Television User Manual


 
Using the TV’s Features
Chapter 3 45
Listings
The Listings appear each time you enter the GUIDE Plus+ system. They
display the current programming for each channel. The current program
of Antenna A is displayed in the video window.
Press the up and down arrow buttons on the remote to browse
channel listings and the channel up and down buttons to page
through the listings. Use the right and left arrow buttons to browse
future program listings.
Press the Green button to skip ahead 24 hours; press the Blue
button to go back 24 hours only when Listings is highlighted.
•To tune to a channel, highlight the program you want to view in the
channel listings and press OK.
Directly access a channel by using the number buttons. To access a
digital channel, enter major # (13), right arrow button, then
subchannel #.
Use the Guide Action Buttons as described below.
Guide Action Buttons
The Blue and Green action buttons’ actions or commands change
according to where you are in the GUIDE Plus+ system. Be sure to look
at the action bar before pressing the action buttons.
When highlighting a program, the following Action buttons appear:
Watch Press the Blue button on the remote to place a timer into the
Schedule so the TV turns on and tunes to the program highlighted in
the channel listing.
Record Press the Green button on the remote to place a timer into
the Schedule so the VCR records the program highlighted in the
channel listing. Or, highlight a program and press the VCR PLUS+
button.
If you have a cable box, changing channels on the TV causes the
cable box channel to change while recording.
Record appears only if you have set up the GUIDE Plus+ system and
specified your VCR type.
Important Notes: Pressing the VCR PLUS+ button begins
recording the currently tuned program without entering the guide
(similar to express recording). The recording stops when the
program ends. The GUIDE Plus+ system must be set up.
You need to make sure that your VCR is tuned to the Line INPUT,
and is turned off prior to recording start time. Do not change
channels on the TV or VCR when making a recording.
Expanded Information
Press INFO on the remote to see additional program information.
If you are highlighting a digital channel, the
channel label will include a subchannel, such as
CBS [4-08].
Listings menu selection
Action buttons
Network logos (if available) or labels
Tip
You can also record a currently tuned program by
pressing VCR Plus+ without entering the GUIDE Plus+
system.
1614682A.05_features_8.22 9/18/03, 5:29 PM45