Filter
Top Products
28
Chapter 3: How to clone TV
These TVs include a full commercial interface that allows your facility to customize the performence to your
specific needs. These settings are only accessible to the installer with the use of the Master
Remote(KM38R01). Contact your RCA Commercial Distribution to obtain a master remote. You can access this
menu by pressing MENU -> 9 -> 6 -> 3 -> 2 using the Master Remote.
After you set up one television, you can copy the settings onto a USB stick and apply them to your other tele-
visions.
You will need a USB Memory stick to learn the settings from your television.
Contact RCA Commercial Distribution(1-800-RCA-2161) to obtain an RCA USB Memory stick.
Cloning Main Menu
Restore Settings to TV
Save Settings to USB
Upload Splash Image to TV
GG
Back NextAdjust
Save Settings to USB
Source Model : DM-931KA
File Name Edit:
J
32
Back NoYes
Save Settings to USB
Save Settings from TV
to J32LE740--.tdf file in USB?
Back
Save Settings to USB
Settings saved from TV
to J32LE740--.tdf file in USB
1. Press the MENU->9->6->3->2 button to enter the
Commercial menu.
2. Press the Down or Up button to select the Clone
Management sub-menu and then press the OK
button.
NOTE : USB stick most be plugged into TV to select
this menu item.
3. Press the Down or Up button to choose Save
Settings to USB and then press the Right button.
4. Edit filename by pressing Up/Down/Left/Right keys.
When finished, press the Right button.
5. Press the Up button to write settings to the USB
stick Settings will be copied to USB drive.
Copying settings out of television:
Chapter 3