Filter
Top Products
108
Editing
When you create a new song, it will automatically be given
a name such as “SONG 0001.” When you’ve finished a
song, you should give it an appropriate name so that your
song data will be easier to manage.
1
Press the [MENU] button.
2
Use the CURSOR [ ] [ ] buttons to move the
cursor to “SONG,” and press the [ENTER] button.
3
Use the CURSOR [ ] [ ] buttons to move the
cursor to “NAME,” and press the [ENTER] button.
The SONG NAME screen will appear.
D_SongName.eps
4
Use the CURSOR [ ] [ ] buttons to move the
cursor to the character that you want to edit.
5
Turn the dial to select the desired character.
6
When you’ve finished specifying the song name,
press the [EXIT] button a number of times to return to
the play screen.
* While the data is being updated, the display will indicate
“Keep power on!” Do not turn off the power while this
message is shown.
A song you’ve created can be inadvertently recorded over
or unintentionally erased.
To prevent such accidents, you can protect the song data
from being rewritten (Song Protect).
If Song Protect is enabled, the following operations cannot
be performed.
• Recording
• Track editing
• Changing the song name
• Song erase
• Rhythm editing
• Writing to the song effect patches
• Undo/Redo
• Factory reset (SONG EFFECT/RHYTHM/ALL)
1
Press the [MENU] button.
2
Use the CURSOR [ ] [ ] buttons to move the
cursor to “SONG,” and press the [ENTER] button.
3
Use the CURSOR [ ] [ ] buttons to move the
cursor to “PROTECT,” and press the [ENTER] button.
The SONG PROTECT screen will appear.
D_SongPro.eps
4
Use the dial to select the “ON” setting.
5
Press the [EXIT] button a number of times to return to
the play screen.
If a song is protected, the song protect symbol is shown
in the screen.
fig.Protect.eps
* While the data is being updated, the display will indicate
“Keep power on!” Do not turn off the power while this
message is shown.
Naming a Song
(SONG NAME)
Protecting a Song
(SONG PROTECT)
BR800_e.book 108 ページ ２０１０年３月２日 火曜日 午後６時４０分