Filter
Top Products
129
EditingMasteringUsing USBConvenient
Functions
Appendixes Quick StartGetting Ready
to Record
Recording/
Playback
Using
Effects
Using
Rhythm
Using a Foot Switch/Expression Pedal
If you connect a foot switch (such as the separately available
BOSS FS-5U or Roland DP-2) to the FOOT SW/EXP PEDAL
jack on the rear panel, you’ll be able to control some
functions using your foot.
fig.ConnectFootSW-e.eps
The expression pedal can be used when the insert effect is
turned on.
Depending on the effect settings, it will function as follows.
• If the WAH (p. 66) TYPE is set to “PEDAL,” the
expression pedal will function as a wah pedal.
• If the PITCH SHIFTER (p. 75) TYPE is set to “PEDAL,”
the expression pedal will function as a pitch shifter
pedal.
• If WAH and PITCH SHIFTER are off, the expression
pedal will function as a volume pedal.
Here’s how to assign the function of the foot switch.
1
Press the [MENU] button.
2
Use the CURSOR [ ] [ ] buttons to move the
cursor to “SYSTEM,” and press the [ENTER] button.
3
Use the CURSOR [ ] [ ] buttons to move the
cursor to “FOOT SWITCH” and use the dial to
specify the function of the foot switch.
D_System_FS_Play.eps
4
Press the [EXIT] button a number of times to return to
the play screen.
Set the polarity switch
as shown in the following.
Foot Switch
(FS-5U etc.)
Expression Pedal
(Roland EV-5 etc.)
• Use only the specified expression pedal (Roland
EV-5, BOSS FV-500L/FV-500H; sold separately).
By connecting any other expression pedals, you
risk causing malfunction and/or damage to the
unit.
• When using an expression pedal, set the pedal’s
MIN volume to “0.”
Using an Expression Pedal
Using a Foot Switch
Value
Explanation
PLAY
The song will alternate between play
and stop each time you press the foot
switch.
REC
The foot switch will perform the
same operation as pressing the
[REC] button.
BR800_e.book 129 ページ ２０１０年３月２日 火曜日 午後６時４０分