Filter
Top Products
EditingMasteringUsing USBConvenient
Functions
Appendixes Quick StartGetting Ready
to Record
Recording/
Playback
Using
Effects
Using
Rhythm
79
Using Insert Effects
This effect adds delayed sound to the direct sound, giving
more body to the sound or creating special effects.
*1 Setting available when TYPE is set to PAN.
Simulation of the characteristics of particular guitar
components such as pickups and different guitar bodies
allows you to switch among a number of different guitar
types all while using a single guitar.
Simulates the sound of a bass guitar. Obtain the sound of a
bass guitar while playing an electric guitar.
You should avoid playing chords when using the
GUITAR TO BASS.
DELAY
Parameter/
Range
Explanation
ON/OFF
OFF, ON
Turns the DELAY effect on/off.
TYPE
This selects which type of delay.
STANDARD This is a simple delay.
PAN
This delay is specifically for stereo output.
This allows you to obtain the tap delay ef-
fect that divides the delay time, then deliv-
er them to L and R channels.
fig.04-050
DLY TIME (Delay Time)
1ms–3400ms
This determines the delay time.
FEEDBACK
0–100
This sets the amount of delay sound re-
turned to the input.
A higher value will increase the number of
the delay repeats.
Feedback is returning a delay signal to the
input.
HIGH CUT (High Cut Filter)
700Hz–11kHz,
FLAT
This sets the frequency at which the high
cut filter begins to take effect. When
“FLAT” is selected, the high cut filter will
have no effect.
E.LEVEL (Effect Level)
0–120
Adjusts the volume of the delay sound.
D.LEVEL (Direct Level)
0–100
Adjusts the volume of the direct sound.
TAP TIME
0–100%
Adjusts the delay time of the left channel
delay.
This setting adjusts the L channel delay
time relative to the R channel delay time
(considered as 100%).
INPUT
OUTPUT L
OUTPUT R
FEEDBACK
DLY TIME
E.LEVEL
DELAY
TAP TIME
ACOUSTIC SIMULATOR
Parameter/
Range
Explanation
ON/OFF
OFF, ON
Turns the ACOUSTIC SIMULATOR effect
on/off.
TYPE
Selects the type of the acoustic simulator.
S
→
AC
Changes a single-coil pickup tone to an
acoustic guitar tone.
H
→
AC
Changes a humbucking pickup tone to an
acoustic guitar tone.
LOW
-50–+50
Adjusts the tone for the low frequency
range.
HIGH
-50–+50
Adjusts the tone for the high frequency
range
BODY
0–100
Adjusts the way the body sounds when
Type is set to S
→
AC or H
→
AC.
The body sound increases as the value is
raised; reducing the value produces a tone
similar to that from a piezo pickup.
LEVEL
0–100
Adjusts the volume.
GUITAR TO BASS
Parameter/
Range
Explanation
ON/OFF
OFF, ON
Turns the GUITAR TO BASS effect on/off.
BR800_e.book 79ページ ２０１０年３月２日 火曜日 午後６時４０分