Filter
Top Products
151
Error Message List
EditingMasteringUsing USBConvenient
Functions
Appendixes Quick StartGetting Ready
to Record
Recording/
Playback
Using
Effects
Using
Rhythm
Stop P.Trainer!
The operation you attempted cannot
be executed while the Phrase Trainer
(p. 134) is operating.
Turn the Time Stretch and Center Cancel function
“OFF.”
p. 134
Stop recorder!
The operation you attempted cannot
be executed while the recorder is op-
erating (i.e., during playback or re-
cording).
Press the [STOP] button to stop playback or record-
ing.
–
System error!
Writing to the BR-800’s memory
failed.
It may be that the BR-800 has malfunctioned. Please
contact Roland customer service or your dealer.
–
Too many files!
You attempted to create more than
1,000 files in Song Sketch mode.
Delete unneeded files. p. 51
Too many
songs!
You attempted to create more than
100 songs.
Delete unneeded songs. p. 107
Unformatted
card!
The SD card is of a type that cannot
be used on the BR-800.
Turn off the power, firmly reinsert the SD card, and
then turn the power on again.
–
Format the card on the BR-800. p. 137
Unsupported
card!
An SD card not supported by the
BR-800 is inserted.
Use an SD card that is supported by the BR-800. p. 142
Unsupported
format!
An SD card of a format not usable by
the BR-800 is inserted.
Format the card on the BR-800. p. 137
You attempted to import a WAV file
that the BR-800 does not support.
Check the format of the WAV file. p. 121
USB buffer full!
A larger amount of MIDI messages
than could be processed correctly
was received via USB.
Reduce the amount of MIDI messages being sent to
the BR-800.
–
Memory full!
The song size exceeded 1 GB.
Erase unneeded tracks. p. 106
The song arrangement exceeded 50
steps.
A song arrangement can contain no more than 50
steps.
p. 96
Message
Cause Action Page
BR800_e.book 151 ページ ２０１０年３月２日 火曜日 午後６時４０分