Filter
Top Products
74
Using Insert Effects
BASS SIM (Bass Simulator)
Simulation of the characteristics of particular bass
components such as pickups and different bass bodies
allows you to switch among a number of different bass
types all while using a single bass.
SLOW GEAR
This produces a volume-swell effect (“violin-like” sound).
DEFRETTER
This simulates a fretless bass guitar.
Parameter/
Range
Explanation
TYPE
Selects the type of the bass simulator.
PAS
→
ACT
Changes from a passive type pickup tone to
an active type pickup tone.
ACT
→
PAS
Changes from an active type pickup tone to
a passive type pickup tone.
SGL
→
HUM
Changes from a single-coil pickup tone to a
humbucking pickup tone.
HUM
→
SGL
Changes from a humbucking pickup tone
to a single-coil pickup tone.
SLD
→
HLW
Changes a solid body bass tone to a hollow
body bass tone with the body resonance
added.
SGL
→
ACO
Changes a single-coil pickup tone to an
acoustic bass tone.
HUM
→
ACO
Changes a humbucking pickup tone to an
acoustic bass tone.
LOW
-50–+50
Adjusts the tone for the low frequency
range.
HIGH
-50–+50
Adjusts the tone for the high frequency
range
BODY
0–100
Adjusts the way the body sounds when
Type is set to SLD
→
HLW, SGL
→
ACO, or
HUM
→
ACO.
The body sound increases as the value is
raised; reducing the value produces a tone
similar to that from a piezo pickup.
LEVEL
0–100
Adjusts the volume.
Parameter/
Range
Explanation
SENS (Sensitivity)
0–100
Adjusts the sensitivity of the slow gear.
When it is set to a lower value, the effect of
the slow gear can be obtained only with a
stronger picking, while no effect is ob-
tained with a weaker picking.
When the value is set higher, the effect is
obtained even with a weak picking.
RISE TIME
0–100
Adjusts the time needed for the volume to
reach its maximum from the moment you
begin picking.
Parameter/
Range
Explanation
TONE
-50–+50
Adjusts the amount of blurring between
the notes.
SENS (Sensitivity)
0–100
This controls the input sensitivity of the de-
fretter.
ATTACK
0–100
Adjusts the attack of the picking sound.
E.LEVEL (Effect Level)
0–100
Adjust the volume of the defretter sound.
D.LEVEL (DIRECT Level)
0–100
Adjust the volume of the direct sound.
BR800_e.book 74ページ ２０１０年３月２日 火曜日 午後６時４０分