Filter
Top Products
Installation
Runco CinemaWall Owner’s Operating Manual 15
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the CinemaWall installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, refer to
page...
1 Mount the CinemaWall on a wall or table stand 16
2 Connect signal sources to the CinemaWall 18
3 Connect external controller to RS-232 port (optional) 20
4 Apply power to the CinemaWall 23
5 Change the OSD language, if desired 23
6 If using the CinemaWall with a PC, adjust PC display prop-
erties
24
7 Display calibration: adjust the following for each input,
starting with Component (DVD/HD1 and/or DVD/HD2);
save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
27 through 33
8 Configure audio inputs 34
Note