Filter
Top Products
Operation
Runco CinemaWall Owner’s Operating Manual 27
PRE
L
IMINAR
Y
Main Menu The Main Menu is the starting point for accessing all CinemaWall functions.
Picture AdjustUse the controls in the Picture Adjust menu to calibrate your CinemaWall for optimum
picture quality.
The CinemaWall has been designed to incorporate setup and calibration standards
established by the Imaging Science Foundation (ISF). The ISF has developed carefully
crafted, industry-recognized standards for optimal video performance and has
implemented a training program for technicians and installers to use these standards to
obtain optimal picture quality from Runco video display devices. Accordingly, Runco
recommends that setup and calibration be performed by an ISF-certified installation
technician.
All signal types require separate processing. Therefore, you need to calibrate each input
separately. Runco recommends calibrating the CinemaWall inputs in the following order:
1. Component (DVD/HD1 / DVD/HD2)
2. S-Video (VIDEO 2)
3. Video (VIDEO 1)
4. PC/RGB
5. HDMI (DVD/HD3 / DVD/HD4)
PICTURE ADJUST
AUDIO
IMAGE OPT
INSTALL
FUNCTION
SIGNAL INFO
CINEMAWALL
SEL. OK EXIT
MENU/ENTER
EXIT
MEMORY SETTING : MEMORY 1
CONTRAST 58
BRIGHTNESS 56
SHARPNESS 52
COLOR 49
TINT 50
VIDEO NR : OFF
KELVIN : 6500K
GAMMA : 2.2
DITHER : AUTO
BLACK LEVEL : STEP 1
COLOR CHART
CINEMA MODE : ON
PICTURE MEM : ISF DAY
PICTURE ADJUST
SEL. ADJ. RETURN
EXIT
1. When you change a picture quality setting, save the change to a
picture memory afterwards. Otherwise, the change will be lost
when a different input is selected. (Picture quality settings are
saved for each input and resolution separately.) For information
about saving settings, refer to
Memory Setting on page 33.
2. Only brightness and contrast controls are available on the
PC/RGB input.
Note