Filter
Top Products
Installation
24 VX-3000d Series Installation/Operation Manual
PRE
L
IMINAR
Y
Other Considerations Other considerations and tips that can help improve your installation:
• Keep the ambient temperature constant and below 35°C (95°F). Keep the projector
away from heating and/or air conditioning vents. Changes in temperature may cause
drifts in the projector circuitry, which may affect performance.
• Keep the projector away from devices that radiate electromagnetic energy such as
motors and transformers. Common sources of these include slide projectors,
speakers, power amplifiers and elevators.
3.4
Installing the Primary
Projection Lens
(VX-3000d Ultra only)
The VX-3000d Ultra primary projection lens is shipped separately from the projector.
Proceed as follows to install it:
1. Carefully remove the projector from the
shipping container and place it on a flat
surface.
2. Loosen the Phillips screw at the bottom of
the decorative bezel on the front of the
projector.
3. Grasp the bezel by the front, then rotate and lift it upward to remove it. (Don’t pull it
straight out.)
4. Carefully remove the lens from the shipping container.
➤