Samsung 760 Series Flat Panel Television User Manual


  Open as PDF
of 282
 
English - 21
Storing Channels in Memory (Automatic Method)
1
Press the MENU button to display the menu.
Pressthe▲or▼buttontoselect
Channel, then press the ENTER button.
2 Pressthe▲or▼buttontoselectAuto Program, then press the ENTER
button.
3 Pressthe▲or▼buttontoselectanantennaconnection,thenpressthe
ENTER button.
➢
Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna signals.
4
When selecting the Cable TV system:
Press the ENTER button to start the auto program.
Pressthe◄or►toselectthecorrectanalogsignalcablesystemsource
among STD, HRC, and IRC, then press the ENTER button. If you have Digital
cable TV, select the cable system signal source for both Analog and Digital.
➢
STD, HRC, and IRC identify various types of cable TV systems. Contact
your local cable company to identify the type of cable system that exists in
your particular area. At this point the signal source has been selected.
5
The TV begins memorizing all available stations.
After all the available channels are stored, the TV starts to remove scrambled
channels (see page 47). The Auto program menu then reappears.
If you want to stop Auto Programming, press the ENTER button.
The Stop Auto Program? message will be displayed. Select Yes by pressing
the◄or►button,thenpressthe
ENTER button.
Press the
EXIT button to exit.
Easy Setting
1
Press the TOOLS button on the remote control.
2 Pressthe▲or▼buttontoselectSwitch to Cable or Switch to Air.
3 Press the ENTER button.
Auto Program
Auto Program is completed.
56 channels are memorized.
DTV Air : 20 Air : 11
DTV Cable : 15 Cable : 10
ReturnEnter
OK
Channel
Antenna : Air
Auto Program
►
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
Auto Program
Select the Antenna source to memorize.
Air
Cable
Auto
ReturnEnterMove
Start
Start
Start
Auto Program
Select the cable system.
Analog
Digital
HRC IRC
HRC IRCSTD
Start
ReturnEnterMove
STD
Auto Program
Stop
DTV Cable 41
77%
DTV Air : 5 Air : 4
DTV Cable : 7 Cable : 5
ReturnEnter
Tools
Anynet+(HDMI-CEC)
Multi-Track Sound : Stereo
Picture Size : 16:9
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
Add to Favorite
Switch to Cable
Move Enter Exit
Auto Program
Auto Program in Progress.
Stop
Cable 3
3%
DTV Air : 5 Air : 4
DTV Cable : -- Cable : --
Enter Return
BN68-01653A-Eng.indb 21 2008-08-27 오후 5:11:54
 previous next