Filter
Top Products
English - 126
Scanning and Switching between Anynet
+
Devices
1 Press the TOOLS button.
Press the ENTER button to select Anynet+ (HDMI-CEC).
2 Pressthe▲or▼buttontoselectDevice List, then press the ENTER button.
➢
Anynet
+
devices connected to the TV are listed.
If you cannot find a device you want, press the red button to scan for
devices.
➢
Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the
Device List menu appears.
3 Pressthe▲or▼buttontoselectaparticulardeviceandpresstheENTER
button. It is switched to the selected device.
➢
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
➢
The time required to scan for devices is determined by the number of connected devices.
➢
When the device scan is complete, the number of devices found are not displayed.
➢
Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when
the TV is already on are not displayed in the device list. In this case, press the red button on the remote to search
devices.
➢
If you have selected an external device by pressing the SOURCE button, you cannot use the Anynet
+
function. Make
sure to switch to an external Anynet
+
device by using the TOOLS button.
ReturnEnter
Move
View TV
Device List
Recording : DVDR
DVDR Operation
Receiver : On
Setup
BN68-01653A-Eng.indb 126 2008-08-27 오후 5:13:03