Samsung BD-C7900 Blu-ray Player User Manual


 
24 English
Connections
Case 4 : Connecting to a TV with Video cables - Good Quality
Using video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (red and white)
terminals on the rear of the player to the VIDEO IN (yellow) / AUDIO IN (red and white) terminals of
your TV.
Turn on the player and TV.
Press the input selector on your TV remote control until the “VIDEO” signal from the player appears
on the TV screen.
If you have set the player's remote control to operate your TV (See page 20), press the TV
SOURCE button on the remote control and select VIDEO as the external source of the TV.
NOTE
Noise may be generated if the audio cable is placed too close to the power cable.
If you want to connect to an Amplifier, please refer to the Amplifier connection pages. (See pages 25~27)
The number and position of the terminals may vary depending on your TV set. Please refer to the user manual of your TV.
If there is only one audio input terminal on the TV, connect it to the AUDIO OUT (right/white) terminal of the player.
CAUTION
Do not connect the player to your TV through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
1.
2.
3.
!
WhiteRed Yellow
Audio/Video cable