Samsung BD-C7900 Blu-ray Player User Manual


 
English 45
05 Setup
Support
Software Upgrade
The Software Upgrade menu allows you to
upgrade software for performance improvements
or additional services. You can check the current
software version, upgrade using the Internet and
set the Auto upgrade notification. If the player is
properly connected to the network by cable or
wirelessly, the player automatically connects to
Samsung's website each time it is turned on and
downloads update files if any valid upgrade exists.
To select By Internet, press the ENTER
button.
A popup message appears if an update is
available, asking if you want to upgrade.
If you select Yes, the player turns off
automatically, restarts, and then begins the
upgrade. (Do not turn it on manually here.)
The update progress popup appears.
When the update is complete, the player turns
off again automatically.
Press the POWER button to turn on the
player.
NOTE
The Update is complete when the player turns off
after restarting. Press the POWER button to turn on
the updated player for your use.
Never turn the player off or on manually during the
update process.
Samsung Electronics shall take no legal responsibility
for player malfunction caused by an unstable
internet connection or consumer negligence during a
software upgrade.
1.
2.
3.
4.
You can also update software in either of the two
ways listed below. The software update process is
essentially the same as in the By Internet option.
USB : Visit www.samsung.com/bluraysupport,
then download and store the latest software
(RUF file) onto a USB flash drive. Connect the
USB flash drive to the USB port of the player
(the disc tray must be empty) to update the
software, then follow the on-screen instructions.
CD/DVD : Visit www.samsung.com/
bluraysupport, download and write the latest
software (RUF file) onto a disc. Insert and play
the disc in the player to start the update, then
follow the on-screen instructions.
NOTE
Software upgrades using the USB Host jack must be
performed with no disc inside.
If you want to cancel the upgrade in the process of
downloading the upgrade data, press the ENTER
button.
When the system upgrade is done, check the
software details in the software Upgrade menu.
Do not turn off the player during the System
Upgrade. It may cause the player not to work
properly.
Software upgrades using the USB Host jack must be
performed with a USB memory flash stick only.
Contact Samsung
Provides contact information for assistance with
your player.
Display
Audio
System
Network
Language
Security
General
Support
Settings
Software Upgrade
Current Version : XXX-XXXXXXXXX
By Internet
Auto Upgrade Notification
: On
> Move " Select ' Return