Samsung BD-C7900 Blu-ray Player User Manual


 
English 23
04 Connections
Case 3 : Connecting to a TV with Component Cables - Better Quality
Connect to your TV using Component video cables and separate audio cables.
You will enjoy high quality images with accurate color reproduction. Component video separates the
picture element into black and white (Y), blue (P
B
), and red (P
R
) signals to present clear and clean
images. (Audio signals are delivered through the audio output.)
Using Component video cables, connect the COMPONENT OUT terminals on the rear of the player
to the COMPONENT IN terminals of your TV.
Using the audio cables, connect the AUDIO OUT (red and white) terminals on the rear of the player
to the AUDIO IN (red and white) terminals of your TV.
Turn on the player and TV.
Press the input selector on your TV remote control until the “COMPONENT” signal from the player
appears on the TV screen.
If you have set the player's remote control to operate your TV (See page 20), press the TV
SOURCE button on the remote control and select COMPONENT as the external source of the TV.
NOTE
Depending on the manufacturer, the component terminals on your TV may be marked “R-Y, B-Y, Y ” or “Cr, Cb, Y”
instead of “P
B
, P
R
, Y”. The number and position of the terminals may vary depending on the TV set.
Please refer to the user manual of your TV.
You can select from a variety of resolution settings for Blu-ray Discs such as 1080i, 720p, 480p, 480i, depending on
the disc type. (See pages 33~34.)
The actual resolution may differ from the setting in the setup menu if both Component and HDMI cables are connected.
The resolution may also be different depending on the disc. (See pages 33~34.)
In DVD playback, if both HDMI and Component jacks are connected and you select the Component 1080p, 1080i or
720p mode, the Display Setup menu will show the output resolution as 1080p, 1080i or 720p in the menu.
The resolution is actually 480i.
-
-
1.
2.
3.
4.
Component cable
(not included)
White Red Blue Green
Red
Audio cable