Samsung BD-C7900 Blu-ray Player User Manual


 
22 English
Connections
Case 2 : Connecting to a TV with a DVI Cable - Best Quality
(Recommended)
Using an HDMI-DVI cable, connect the HDMI OUT 1 terminal on the rear of the player to the DVI IN
terminal of your TV.
Using an audio cable, connect the AUDIO OUT (red and white) terminals on the rear of the player
to the AUDIO IN (red and white) terminals of your TV.
Turn on the player and TV.
Press the input selector on your TV remote control until the HDMI-DVI signal from the player appears
on your TV screen.
If you have set the player's remote control to operate your TV (See page 20), press the TV
SOURCE button on the remote control and select HDMI-DVI as the external source of the TV.
NOTE
HDMI outputs only a pure digital signal to the TV. If your TV does not support HDCP (High-bandwidth Digital Content
Protection), random noise appears on the screen.
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
When you connect the player to the TV using the HDMI-DVI cable for the first time or connect to a new TV, the player
sets the HDMI output resolution to the highest supported by the TV automatically.
1.
2.
3.
4.
TV monitor
White Red
HDMI-DVI cable
(not included)
Audio cable