Samsung DVD-V6400 DVD Player User Manual


 
English
- 23
Settings
4
Press the or button to select required
preset TV station.
The selected station is displayed at the same
time on the television screen.
5
Press the OK button to change the programme
number assigned to a station.
6
Press the or button to select required
position, then press the OK button to swap the
position.
For example, To move a TV station in
programme 1 to programme 3.
• Press the MENU button to exit the menu.
❉ ❉ TV STATION TABLE ❉ ❉
PR CH NAME
1
2
3 021 - - - -
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
❉ ❉ TV STATION TABLE ❉ ❉
PR CH NAME
1 021 - - - -
2
3
4
5
SWAPPING : OK
RETURN
Setting the VCR Output
Channel
Your DVD-VCR output channel may need to be
changed if the pictures suffer from interference or if your
TV cannot find the pictures.
1
Press the MENU button, then press the OK or
button.
2
Press the or button to select Install, then
press the OK or button.
The Install menu is displayed.
3
Press the or button to select VCR Output CH.
4
Press the OK or œ or button to select the
required output channel (CH21~CH69).
CH21 ..CH60 ..CH69
• Press the MENU button to exit the menu.
Then tune your television again (see page 17).
SETUP
DVD
VCR
PROG
FUNC
Install
Auto Setup
Manual Setup
VCR Output CH :CH60
OK
RETURN
MENU
SETUP
DVD
VCR
PROG
FUNC
Install
Auto Setup
Manual Setup
VCR Output CH :CH60
OK
RETURN
MENU
You can select the required output channel
directly by using the number button.
Note