Filter
Top Products
English
- 45
DVD Functions
Setting Up the Display
Options
1
Press the MENU button in the stop mode.
Press the … or † button to select DVD, then press
the OK or √ button.
2
Press the … or † button to select Display Setup,
then press the OK or √ button.
3
Press the … or † button to select TV Aspect,
press the OK or √ button.
4
Press the … or † button to select the required
item, then press the OK button to select the
required option
❚
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen setting (aspect ratio).
• 4:3 Letter Box :
Select when you want to see the total 16:9 ratio
screen DVD supplies, even though you have a
TV with a 4:3 ratio screen. Black bars will appear
at the top and bottom of the screen.
• 4:3 Pan Scan :
Select this for conventional size TVs when you
want to see the central portion of the 16:9 screen.
(Extreme left and right side of movie picture will
be cut off.)
• 16:9 Wide :
You can view the full 16:9 picture on your
widescreen TV.
❚
Black Level
Adjusts the brightness of the screen. (On/Off)
❚
NTSC Disc Output
“NTSC” if the screen only has one NTSC-video
entrance. If this is not the case, you can choose to
leave “PAL60” as is.
❚
DVD Out
• RGB : Sends RGB signal from the AV JACK
(SCART terminal).
• S-Video : Sends S-VIDEO signal from the
AV JACK (S-Video terminal).
• Video : Sends COMPOSITE VIDEO signal from the
AV JACK (SCART terminal).
SETUP
DVD
VCR
PROG
FUNC
DVD Setup
Language Setup
√√
Audio Setup
√√
Display Setup
√√
Parental Setup :
√√
OK RETURN MENU
Display Setup
TV Aspect : 4:3 L-Box
√√
Black Level : Off
√√
NTSC Disc Output : PAL60
√√
DVD Out : RGB
√√
OK RETURN MENU
TV Aspect
√√
4:3 Letter Box
4:3 Pan Scan
16:9 Wide
OK RETURN MENU