Samsung DVD-V6400 DVD Player User Manual


 
English
- 39
Playing Back
Searching for a
Specific Sequence
Each time you record a cassette on this DVD-VCR,
an “index” is automatically marked on the tape when
recording starts.
The Search function allows you to fast-forward or rewind
to a specific index and start playback from that point.
Depending on the direction selected, the indexes are
numbered as follows:
• This DVD-VCR uses a standard indexing system
(VISS). As a result, it will recognize any indexes
marked by other VCRs using the same system
and vice versa.
Go To [0:00:00] Stop
Use this feature when you want to search for the 0:00:00
counter position on a cassette.
Press the CLEAR button at the point on the tape where
you want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the
0:00:00 counter position, and then automatically stop at
that position.
1
Press the MENU button, then press the or
button to select FUNC.
Press the OK or button.
The Function menu is displayed.
etc.
21 1 2
etc.
Prev
Seq.
Seq. being
played
Next
Seq.
2
Press the or button to select
VCR Function
,
then press the OK or button.
The VCR Function menu is displayed with the Go
To [0:00:00] selected.
• It can be displayed simply by pressing the
SEARCH button.
3
Press the OK or button again.
End Search
Use this feature when you want to search for a blank
position to record a program on a cassette.
The VCR will fast forward, searching for a blank position,
and then automatically stop at that position.
If the VCR reaches the end of the tape during end
search, the tape will be ejected.
1
Press the SEARCH button
The VCR Function menu is displayed.
Press the or button to select End Search.
2
Press the OK or button.
SETUP
DVD
VCR
PROG
FUNC
Function
DVD Function
VCR Function
OK RETURN MENU
SETUP
DVD
VCR
PROG
FUNC
VCR Function
Go To [0:00:00]
End Search
Intro Scan
OK RETURN MENU
SETUP
DVD
VCR
PROG
FUNC
VCR Function
Go To [0:00:00]
End Search
Intro Scan
OK RETURN MENU