Filter
Top Products
28 -
English
VCR Functions
Video cassettes have a safety tab to prevent accidental
erasure. When this tab has been removed, you cannot
record on the tape.
1
If you wish to protect a cassette, break off the tab
using a small screwdriver.
2
To re-record over a protected cassette (safety tab
broken), cover the hole with adhesive tape.
Repeat Play
You can set repeat play to repeat the tape continuously
from beginning to end.
1
Press the MENU button, then press the … or †
button to select VCR.
2
Press the OK or √ button.
The Tape Select is highlighted.
3
Press the … or † button to select Repeat Play.
Press the OK or √ button to select On or Off.
• On : Repeat play.
• Off : Do not wish to repeat play.
Selecting the
Recording Speed
You can record a cassette at two different speeds:
• SP (Standard Play)
• LP (Long Play)
In Long Play modes:
• Each cassette lasts twice as long
• The recording is of a slightly lower quality
1
Press the SPEED button to select SP or LP.
• The selected record speed will appear on the
front panel display.
Type Recording Time (in SP)
E180 180 mins. or 3 hours
E240 240 mins. or 4 hours
E260 260 mins. or 4 hours and 20 mins.
E300 300 mins. or 5 hours
SETUP
DVD
VCR
PROG
FUNC
VCR Setup
Tape Select : E180
√√
Repeat Play : Off
√√
OK RETURN MENU
SETUP
DVD
VCR
PROG
FUNC
VCR Setup
Tape Select : E180
√√
Repeat Play : Off
√√
OK RETURN MENU
SETUP
DVD
VCR
PROG
FUNC
VCR Setup
Tape Select : E180
√√
Repeat Play : Off
√√
OK RETURN MENU
Protecting a Recorded
Cassette