Filter
Top Products
English
- 17
Settings
Settings
Tuning Your Television
for the DVD-VCR
You must tune your television for the DVD-VCR only
if you are using the RF cable.
To view pictures from your DVD-VCR when a Scart
cable is used, the television must be set to the
audio/video mode (AV).
1
Switch on the television.
2
Switch on the DVD-VCR by pressing the
/I STANDBY/ON on the front of the DVD-VCR
or STANDBY/ON on the remote control.
3
Select a programme position on the television
to be reserved for use with your DVD-VCR.
4
Insert the video cassette in the DVD-VCR.
Check that the DVD-VCR starts reading the
cassette; if not, press the √II button.
5
Start a scan on your television or set the
television to UHF channel 60.
6
Fine tune the television until the pictures and
sound are obtained clearly.
7
When the picture and sound are perfectly clear,
store this channel at the desired programme
position on the television.
That programme is now reserved for use with
your DVD-VCR.
•Tuning Your Television for the DVD-VCR . . 17
•Setting the Date and Time . . . . . . . . . . . . . . 18
•Setting the Menu Language . . . . . . . . . . . . . 19
•Presetting the Stations Automatically . . . . . 19
•Presetting the Stations Manually . . . . . . . . . 20
•Clearing a Preset Station . . . . . . . . . . . . . . . 21
•Changing the Preset Station Table . . . . . . . . 23
•Setting the VCR Output Channel . . . . . . . . . 23