Filter
Top Products
20 -
English
Settings
Presetting the Stations
Manually
You do not need to preset the stations manually if
you have already set them automatically.
1
Press the MENU button, then press the OK or
√ button.
2
Press the … or † button to select Install, then
press the OK or √ button.
The Install menu is displayed.
3
Press the … or † button to select Manual
Setup, then press the OK or √ button.
The TV STATION TABLE menu is displayed.
SETUP
DVD
VCR
PROG
FUNC
Setup
Language : English
√√
Clock
√√
Install
√√
User Set
√√
Auto Power Off : Off
√√
Screen Messages : On
√√
OK RETURN MENU
SETUP
DVD
VCR
PROG
FUNC
Install
Auto Setup
√√
Manual Setup
√√
VCR Output CH :CH60
√√
OK RETURN MENU
❉ ❉ TV STATION TABLE ❉ ❉
PR CH NAME
1
2
3
4
5
……†† √√
SWAPPING : OK
DELETE : CLEAR RETURN
3
Press the … or † button to select Auto Setup,
Press the OK button.
A message is displayed, indicating that any
channels already preset on your DVD-VCR will
be deleted.
4
Press the OK button to start the auto scanning.
The message Please Wait is displayed.
•The first frequency band is scanned and
stored, then the DVD-VCR searches for the
second station and so on.
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically
to programme 1.
•If you wish to cancel the auto scanning before
the end, press the MENU button.
Auto Setup
Your data will be lost
Press OK to continue
MENU to exit
OK
RETURN MENU
Auto Setup
RETURN
MENU
Please Wait
10%
√√
The number of stations automatically stored
by the DVD-VCR depends on the number
of stations that it has found.
The time and date are set automatically
from the broadcast signal. If the signal is
weak or ghosting occurs, the time and date
may not be set automatically. In this case,
they should be set manually (refer to page
18).
Once the auto scanning procedure has
finished, some stations may have been
stored more than once; select the stations
with the best reception and delete the ones
no longer required (refer to page 22).
Note