Filter
Top Products
34
- English
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
● On : When Movie soundtracks are played at low volume or
from smaller speakers, the system can apply appropriate
compression to make low-level content more intelligible and
prevent dramatic passages from getting too loud.
● Off : You can enjoy the movie with standard Dynamic
Range.
5
Use the …† buttons to select the desired
item(PCM, Bitstream, DTS-Off, DTS-On,
Dynamic Compression-Off or Dynamic
Compression-On).
Then press the ENTER or √ button.
4
Select the sub menu(Digital Output, DTS or
Dynamic Compression) using the …†
buttons, then press the ENTER or √ button.
Digital Output
●
PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM if your amplifier system is stereo and/or
Dolby Prologic.
●
Bitstream : Outputs bitstream (original format) such
as Dolby or DTS.
Select bitstream if your amplifier system has multi
channel digital audio surround decoding (Dolby
Digital and/or DTS).
DTS
●
Off : Doesn’t output DTS bitstream (original format).
●
On : Outputs DTS bitstream. (via Digital output)
Select DTS when connecting to a digital amp with
DTS decoder.
●
When DTS soundtrack is played, sound is not output
from Analog Audio Output.
RETURNSELECTMOVE EXIT
Audio
No Disc
Digital Output : PCM
√√
DTS : Off
√√
Dynamic Compression
: On
√√
PCM
Bitstream
RETURNSELECTMOVE EXIT
Digital Output : PCM
√√
DTS : Off
√√
Dynamic Compression
: Off
√√
Off
On
Select the item that matches the audio connection
you selected on pages 21~23(Method 1, 2 and 3).
Connecting & Setting UP
Audio
RETURNSELECTMOVE EXIT
Audio
No Disc
Digital Output : PCM
√√
DTS : Off
√√
Dynamic Compression
: Off
√√
Off
On
■
Press the RETURN or
œ
button to return
to the previous menu.
Press the MENU button to exit the menu.
NOTE
Timer Rec.
Setup
Timer Rec.
Setup
Timer Rec.
Setup
No Disc
RETURNSELECTMOVE EXIT
Audio
No Disc
Digital Output : PCM
√√
DTS : Off
√√
Dynamic Compression
: On
√√
Timer Rec.
Setup
AK68-00683A-0v(14~35) 2005.9.28 5:31 AM Page 34