Filter
Top Products
42
- English
Recording
Making a One Touch Recording
(OTR)
You can set the DVD-Recorder to record in 30-minute
increments by pressing the REC button.
1
If you want to record a TV channel, use the
CH( / ) buttons or number buttons to
select a desired channel.
If you want to record through a connected
external component, press the INPUT button
to select an appropriate external
input(LINE1, LINE 2 or DV).
●
CATV channels: 1 to 125
●
TV channels: 2 to 69
Example 1) Selecting Channel 120
+ +
Example 2) Selecting Channel 9
+
2
Press the REC button to start recording.
3
Press the REC button to adjust the recording
time.
➞ 0:30 ➞ 1:00 ➞ ... 8:00 ➞ off
To view the current status of the disc and progress of
recording : Press the INFO button, and information
about the disc will appear.
Press the INFO button once again. Then you can
check the information about the title being
recorded.
30 seconds before the recording is done, a
message asking whether you want the recorder to
power off when the recording is done, will appear
on your screen.
To stop recording
Press the STOP ( ) button. The message “Do you want
to stop recording?” is displayed.
●
Press the œ √ buttons to select Yes, and then press
the ENTER button.
OTR Mode
0:30
■
The timer counter decreases minute 8:00
to 0:00, then the DVD Recorder stops
recording.
NOTE
DVD-RAM(VR) Disc Info
Disc Name
Total Title 15
Total Playlist 2
Recordable Time 02:00 SP
Protection Not Protected
Screen Recording: CH 7 [Mono]
APR 24 2005 SUN 12:00 AM
DVD-RAM(VR) Recording Info
Name APR/04/2005 12:00 AM
Recording Title 15
Created Time APR/04/2005 12:00 AM
Recording Time 00:02:05
APR 24 2005 SUN 12:00 AM
Do you want to stop recording?
Yes No
OTR is going to be ended soon
and power will be turned off automatically.
Press [ENTER] button to continue to use DVD-Recorder.
OK
AK68-00683A-04(36~46) 2005.9.28 5:24 AM Page 42