Filter
Top Products
40
- English
Recording
5
Press the REC button.
To stop recording
Press the STOP ( ) button to stop or finish a recording
in progress.
●
When using DVD-RAM/DVD-RW/DVD-R discs, the
message ‘Updating the information of disc. Please wait
for a moment’ is displayed
Recording from external
equipment
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE button to close the
disc tray.
Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RAM disc is used, whether to format
or not will be asked first. (See page 37)
If an unused DVD-RW disc is used, whether to initialize
or not will be asked first. (See page 37)
3
Press the INPUT button to select the input
source according to the connection you
made.
The front panel display changes in the following
sequence:
➞
Channel Number
➞
L1
➞
L2
➞
DV
If you connect a digital camcorder, press the
INPUT button to select DV. (See page 41)
4
Press the REC MODE button repeatedly, (or
press the REC MODE button and then press
the …† button) to select the recording
speed(quality).
➞
SP ➞ LP ➞ EP ➞ XP
Before you start
Record Mode
SP (02:12)
■
You can not change the recording mode and
input source while recording.
■
Recording will stop automatically if there is no
free space left for recording.
■
Up to 99 titles can be recorded onto a disc.
■
Recording will stop automatically if a copy
protected image is selected.
■
DVD-RAM/DVD-RW discs must be formatted
before starting to record. Most new discs are
sold unformatted.
■
Do not use DVD-R authoring discs with this
unit.
NOTE
Recording
AK68-00683A-04(36~46) 2005.9.28 5:24 AM Page 40