Filter
Top Products
20
DVD-R4000
Playing back
Marking places to play again—MARKER
You can mark positions by pressing [MARKER]. Also use on-
screen menus to mark, recall, and clear positions.
[RAM] [DVD-R]
Mark up to 999 positions. The unit records the markers directly onto
the disc and they remain intact even if you remove the disc.
[DVD-V] [VCD] [CD] [MP3]
Mark up to 5 positions. The markers clear when you open the disc
tray.
During play
Press [MARKER].
One marker is added.
1 During play
Press [DISPLAY].
The on-screen menus appear. (e.g., DVD-RAM)
2 Press [3, 4] to select the “Play”
and press [1].
3 Press [3, 4] to select “Marker”
and press [1] to highlight the first
asterisk (¢).
[RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3]
Press [2, 1] to select an asterisk (¢) and
press [ENTER].
One marker is added.
Press [2, 1] to select a marker number
and press [ENTER].
Play starts from the marked position.
Press [2, 1] to select a marker number
and press [CANCEL].
An asterisk replaces the number and the position is cleared.
To clear the on-screen menus
Press [RETURN].
Marking positions directly
3, 4, 2, 1
ENTER
Using on-screen menus to mark
positions
Displaying the marker icon
Marking positions
When marking positions 11 and above
[RAM] [DVD-R]
1 Press [2, 1] to highlight “1–
10”.
2 Press [3, 4] to select “11–20”.
You can select the next group of
10 when the current group is full.
3 Press [1].
The first asterisk is highlighted.
4 Press [ENTER] to mark a position.
Playing from a marked position
Clearing markers
Disc
Video
Audio
Play
Sound track
Subtitle
1
Audio channel
OFF
L R
Î Digital 2/0ch
Disc
Video
Audio
OFF
1s10
††††††††††
Marker
Play
Repeat play
1s10
††††††††††
†††††
1
2
1s10
[Note]
≥You cannot use this feature if:
– the disc’s elapsed play time is not shown in the display.
– you are using a play list. [RAM]
– protection (cartridge ➜page 11, disc ➜page 34) is set
(you can still recall the markers to play a position).
≥Subtitles around markers may fail to appear.
≥Markers are cleared when you finalize DVD-R (➜page 34).
≥Markers on DVD-RAM and DVD-R are ordered by time, so
marker numbers can change when you add and delete
them.