Filter
Top Products
16
DVD-R4000
Playing back
Playing discs
[RAM] [DVD-R] [DVD-V] [VCD] [CD] [MP3]
1 Press [Í, DVD POWER] to turn the
unit on.
2 Press [< OPEN/CLOSE] to open the
tray and insert a disc (➜ page 15).
≥Press the button again to close the tray.
≥If cartridge protection is activated (➜page 11), play begins
automatically when you close the tray. [RAM]
≥You cannot play continuously from one side of a double-
sided disc to the other. Eject the disc and turn it over.
3 Press [1] (PLAY).
The unit takes some time to read the disc
before play starts. (When a menu screen
appears on the television ➜ next page).
≥If the resume function (➜ below, to stop play) is not active,
playback will begin from the most recently recorded pro-
gram. To play from the beginning of a disc, select “PLAY
FROM TOP” in the FUNCTIONS window (➜page 23).
To stop play
Press [∫].
≥When “PLAY” flashes on the display, resume func-
tion is active. Press [1] (PLAY) to start play from
where you stopped it.
To cancel, press [∫] until “PLAY” goes out. (The
position is also cleared when you turn the unit off
or open the disc tray.)
≥The screen saver may appear when you
stop play. Press [∫] again and you can
use this unit’s tuner to watch television.
To pause play
Press [;]. (Press again to restart play.)
Auto power-off
The unit switches to standby after about 6 hours in the stop mode.
You can turn this feature off or change the time to 2 hours
(➜page 46, Set Up—Off Timer).
[Note]
≥If a disc is loaded, the unit will come on and play will start when
you press [1] (PLAY).
≥When you play a disc with an audio-only track, the video from the
previous disc may continue to be shown on the television.
≥Actual sound levels for DVD-Video are lower compared to televi-
sion broadcast or playback of other discs. To avoid a sudden
increase in volume level when switching from DVD-Video, reduce
the volume setting before playing other sources or switching to
television broadcast.
Disc tray
Numbered
buttons
1
2
ERASE
3
:/
22
,
11
/
9